I/O Leds - ABB ARC600 User Manual

1MRS758459 J
Table 17: X4 connector types
Connector
Panel header
Matching plug
1
LOAD/CUT
Figure 12: X4 connector schematics
1)
Can be used as a 4...20 mA input using external resistor
3.2.6

I/O LEDs

The device has two LEDs indicating the AC and LINK status. Nine LEDs are available
to indicate the disconnector status. For indicating the grounding disconnector
status, the device has six LEDs.
3.2.6.1 AC and LINK LEDs
The device has two LEDs indicating the AC and LINK status.
Table 18: AC and LINK LEDs
LED
AC
LINK
3.2.6.2 Disconnector LEDs
The device has nine LEDs to indicate the disconnector status. They are located on
the device front panel. Each disconnector has three LEDs, which indicate the status
of the disconnector.
ARC600
User Manual
2 3 4 5 6
LOAD CURRENT TEST LOAD
Manufacturer
Phoenix Contact
Phoenix Contact
7 8 9 10 11
HEATER -5...5 V
1)
Description
AC power is connected to connector X2.1 pins
1 and 2
The IEC control link to SCADA is active
Physical connections
Connector type (part
number)
MSTBV 2.5/15-GF-5.08
(1777206)
MSTB 2.5/15-STF-5.08
(1778111)
12 13 14 15
EXTRA INPUTS EXTRA OUTPUT
31