ABB ARC600 User Manual page 58

Service configuration
Name
SSH protocol version
SSH public keys
Table 24: DHCP server
Name
DHCP Server Settings
Enabled
Required Settings
Subnet
Subnet mask
Range low IP address
Range high IP address
Optional Settings
Domain name
DNS Servers
Gateway IP address
Broadcast IP address
Default lease time
Maximum lease time
NTP Servers
LPR Servers
WINS Servers
58
Description
Selects which SSH protocol versions are enabled
in SSH Server. It is recommended to allow only
SSH protocol version 2 (SSH2) to be used.
SSH Public keys can be added for remote logins
with SSHkeys.
Description
Determines if the device acts as a DHCP server
in LAN
Defines the address of the subnet to listen to
Defines the subnet mask of the subnet to lis-
ten to
Defines the lowest IP address to share
Defines the highest IP address to share
DNS domain name given to clients
List of DNS servers (comma separated)
IP address of the default gateway. This must
usually be defined as Arctic's own IP address.
Usually the last IP address of the subnet
Given to clients that don't request a specific
lease length (empty:10800)
The maximum lease time given to clients
(empty:10800)
List of NTP servers (comma separated)
List of line printer (LPR) servers (comma sepa-
rated)
List of WINS servers (comma separated)
1MRS758459 J
Value range
SSH1, SSH2
Value range
No, Yes
ARC600
User Manual