Using Repertory Dial - Siemens optiPoint 410 entry S V6.0 Operating Instructions Manual

Outgoing Calls
Schritt für Schritt
If req.
Shift
Repertory dial
16

Using Repertory Dial

You can store the function "Repertory dial" to the
second level of a function key, see
The "Repertory dial" function is similar to selected dial-
ing. However, it can also incorporate dialing control
functions at any point within the repertory dialing se-
quence. The HiPath 8000 automatically detects wheth-
er the digits represent a number or a URL.
Control Action During Dialing
Function
OK Deactivates the Auto Dial Timer, for exam-
ple, and dials immediately.
Pause Waits 3 seconds before sending any char-
acters following this control function.
Consult Consultation is not supported by optiPoint
410 entry.
Clear Can be used to end calls if only this com-
mand has been entered.
Prerequisite: The "Repertory dial" function key is con-
figured with a corresponding phone number and corre-
sponding dialing control characters, see
In order to assign "Repertory dial" to the second level,
the "Shift" function key must also be configured, see
page 38.
n
Lift the handset.
Press the Shift key.
Press the "Repertory dial" function key. The stored
phone number is dialed with corresponding dialing con-
trol characters.
page 38.
page 39.