Emerson Bettis XTE3000 Installation, Operation And Maintenance Manual page 20

Section 7: Modbus I/O List
October 2022
3. Alarms1:
This is a bit enumerated register. The possible values are:
Values
b0
b1
b2
b3
b4
b5
b6
b7
b8
b9
b10
b11
b12
b13
b14
b15
4. Alarms2:
This is a bit enumerated register. The possible values are:
Values
b0
b1
b2
b3
b4
b5
b6 - b15
5. Contactor Cycles, Recent Contactor Cycles:
These data are contained in two registers. The first register contains high order bits, the second
contains the low order bits. Resolution data: 100 cycles.
6. Motor Run Time, Recent Motor Run Time, Time without electrical power,
Recent time without electrical power:
These data are contained in two registers. The first register contains high order bits, the second
contains the low order bits. Engineering unit: hours.
7. Test Date, Recent Log Date, Date of last torque profile in OP, Date of last torque profile in CL,
Date Of Torque Reference In OP, Date Of Torque Reference in Close:
These registers contain date data that are represented in BCD format. The first register contains the
day (in the first byte) and the month (in the second byte); the second register contains the year.
Example: Test Date (I. Registers 15, 16 - Address 14, 15)
16
Installation, Operation and Maintenance Manual
Description
1 = Motor Thermostat
1 = Hi-Hi Torque in open direction
1 = Hi-Hi Torque in close direction
1 = Blocked in open
1 = Blocked in close
1 = Hi-Hi Temperature
1 = Positioner Sensor
1 = Speed Sensor
1 = Main Voltage
1 = K1 Contactor
1 = K2 Contactor
1 = Configuration Error
1 = Hardware Error
1 = Low Battery
1 = Lost Phase
1 = Request Signal
Description
1 = Max. torque intermediate position
1 = Jammed in close
1 = Jammed in open
1 = Direction test fail
1 = Mid travel in open
1 = Mid travel in close
Spare - Not used
Input Register 14 = 0x1210
Input Register 15 = 0x2008
Day: 12, Month: 10 (October)

Year: 2008

VCIOM-15081-EN Rev. 7
Modbus I/O List