Table of Contents
Advertisement
3.13
FREQUENCY MEASUREMENT (HZ)
The frequency measurement is available in V, W and A for AC and AC+DC
measurements. The measurement is based on a count of zero crossings
(positive-going edges).
3.13.1 Frequency Measurement (V)
To measure the frequency in voltage, proceed as follows:
5.
Set the switch to
6.
Select AC or AC+DC by pressing the
desired choice is reached.
7.
Connect the black lead to the COM terminal and the red lead to the "+"
terminal.
8.
Connect the test probes or the alligator clips to the circuit to be
measured.
The measured value is displayed on the screen.
3.13.2 Frequency Measurement (A)
1.
Set the switch to
displayed.
2.
Select AC or AC+DC by pressing the
choice is reached.
3.
Clamp the jaws around the conductor to be measured.
and press the
and press the
31
button. The Hz symbol is displayed.
(yellow) button until the
button. The Hz symbol is
(yellow) button until desired
Advertisement
Table of Contents
