Lubrication system
■
Oil capacity (Drain and refill [Reference
With filter
Without filter
*
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up the engine and turn off the hybrid system, wait
more than 5 minutes, and check the oil level on the dipstick.
■
Engine oil selection
"Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use
Toyota approved "Toyota Genuine Motor Oil" or equivalent to sat-
isfy the following grade and viscosity.
Oil grade:
0W-16:
API grade SN "Resource-Conserving", SN PLUS "Resource-
Conserving" or SP "Resource-Conserving"; or ILSAC GF-6B
multigrade engine oil
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL "Energy-Conserving", SM "Energy-Conserving", SN
"Resource-Conserving", SN PLUS "Resource-Conserving" or SP
"Resource-Conserving"; or ILSAC GF-6A multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-16 is filled into your
Toyota vehicle at manufactur-
ing, and the best choice for
good fuel economy and good
starting in cold weather.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 0W-16, 0W-20,
5W-20 or 5W-30 engine oil is
recommended.
8-1. Specifications
*
])
4.5 L (4.8 qt., 4.0 Imp. qt.)
4.2 L (4.4 qt., 3.7 Imp. qt.)
Temperature range anticipated
before next oil change
479
Preferred
8