Table of Contents
Advertisement
230
4-3. Operating the lights and wipers
Turning the high beams on/off manually
■
Switching to the high beams
Push the lever away from you.
The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.
Pull the lever to its original posi-
tion to activate the Automatic
High Beam system again.
■
Switching to the low beams
Press
the Automatic
Beam switch.
The Automatic High Beam indi-
cator will turn off.
Press the switch to activate the
Automatic High Beam system
again.
■
Temporarily switching to the low beams
Pull the lever toward you and
then return it to its original posi-
tion.
The high beams are on while
the lever is pulled toward you.
However, after the lever is
returned to its original position,
the low beams remain on for a
certain amount of time. After-
wards,
Beam will be activated again.
■
Temporarily switching to the low beams
It is recommended to switch to the low beams when the high beam may
cause problems or distress to other drivers or pedestrians nearby.
High
the Automatic
High
Advertisement
Table of Contents
