Table of Contents
Advertisement
Changing settings of the pre-collision system
■
Enabling/disabling the pre-collision system
The pre-collision system can be enabled/disabled on
display) or
(7-inch display) (P. 100, 115) of the multi-informa-
tion display.
The system is automatically enabled each time the power switch is
turned to ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
4-5. Using the driving support systems
255
(4.2-inch
4
Advertisement
Table of Contents
