166
3-3. Adjusting the seats
■
Cancelation procedure
Carry only the key you want to cancel and then close the driver's
door.
If 2 or more keys are in the vehicle, the driving position cannot be
canceled properly.
Turn the power switch to ON mode.
1
While pressing the "SET" button, press and hold the door lock
2
switch (either lock or unlock) until the buzzer sounds twice.
If it button could not be canceled, the buzzer sounds continuously for
approximately 3 seconds.
■
Recalling the driving position using the memory recall function
●
Different driving positions can be registered for each electronic key. There-
fore, the driving position that is recalled may be different depending on the
key being carried.
●
If a door other than the driver's door is unlocked with the smart entry & start
system, the driving position cannot be recalled. In this case, press the driv-
ing position button which has been set.
■
Customization
Some functions can be customized. (P. 487)
WARNING
■
Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear
passenger or squeeze your body against the steering wheel.