Turning the BSM function on/off
Press
1
/
Press
2
/
Press
of the meter control switch.
3
Each time
Setting the outside rear view mirror indicator brightness
The brightness of the indicators on the outside rear view mirrors can
be changed on
■
The outside rear view mirror indicators visibility
When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.
■
When "Blind Spot Monitor Unavailable" is shown on the multi-informa-
tion display
Ice, snow, mud, etc., may be attached to the rear bumper around the sensors.
(P. 310)
The system should return to normal operation after removing the ice, snow,
mud, etc. from the rear bumper.
Additionally, the sensors may not operate normally when driving in extremely
hot or cold environments.
■
When there is a malfunction in the Blind Spot Monitor
If a system malfunction is detected due to any of the following reasons, a
warning message will be displayed:
●
There is a malfunction with the sensors
●
The sensors have become dirty
●
The outside temperature is extremely high or low
●
The sensor voltage has become abnormal
4-5. Using the driving support systems
of the meter control switches, select
of the meter control switches, select
is pressed, the function changes on/off.
(P. 117) of the multi-information display.
309
.
.
4