206
4-2. Driving procedures
■
Steering lock motor overheating prevention
To prevent the steering lock motor from overheating, the motor may be sus-
pended if the hybrid system is turned on and off repeatedly in a short period
of time. In this case, refrain from operating the hybrid system. After about 10
seconds, the steering lock motor will resume functioning.
■
When a message requesting the smart entry & start system be inspected
is displayed on the multi-information display
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer immediately.
■
If the "READY" indicator does not come on
In the event that the "READY" indicator does not come on even after perform-
ing the proper procedures for starting the vehicle, contact your Toyota dealer
immediately.
■
If the hybrid system is malfunctioning
P. 76
■
If the electronic key battery is depleted
P. 408
■
Operation of the power switch
●
If the switch is not pressed shortly and firmly, the power switch mode may
not change or the hybrid system may not start.
●
If attempting to restart the hybrid system immediately after turning the power
switch off, the hybrid system may not start in some cases. After turning the
power switch off, please wait a few seconds before restarting the hybrid sys-
tem.
■
If the smart entry & start system has been deactivated in a customized
setting
P. 460