Table of Contents
Advertisement
322
4-5. Using the driving support systems
WARNING
■
Objects which may not be properly detected
The shape of the object may prevent a sensor from detecting it. Pay partic-
ular attention to the following objects:
●
Wires, fences, ropes, etc.
●
Cotton, snow and other materials that absorb sound waves
●
Sharply-angled objects
●
Low objects
●
Tall objects with upper sections projecting outwards in the direction of your
vehicle
●
People may not be detected if they are wearing certain types of clothing.
■
When using Toyota parking assist-sensor
In the following situations, the system may not function correctly due to a
sensor malfunction, etc. Have the vehicle checked by your Toyota dealer.
●
The Toyota parking assist-sensor operation display flashes, and a buzzer
sounds when no objects are detected.
●
If the area around a sensor collides with something, or is subjected to
strong impact.
●
If the bumper collides with something.
●
If the display shows continuously without beeping, except when the buzzer
volume is muted.
●
If a display error occurs, first check the sensor.
If the error occurs even if there is no ice, snow or mud on the sensor, it is
likely that the sensor is malfunctioning.
■
Notes when washing the vehicle
Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.
●
When using a high pressure washer to wash the vehicle, do not spray the
sensors directly, as doing so may cause a sensor to malfunction.
●
When using steam to clean the vehicle, do not direct steam too close to
the sensors as doing so may cause a sensor to malfunction.
●
When using an automatic car wash, disable the Toyota parking assist-sen-
sor
Advertisement
Table of Contents
