Service Manual
19
Demount the motor.
fig.7766
Mount the new motor.
Connect the motor cable and refit the earth screw.
Mount the cover panel to the motor cable.
Fasten the belt. Make sure the belt is in position.
Check the belt tension.
Mount the rear panel.
6.3 Replacement of the belt
Disconnect the power to the machine.
Demount the rear panel.
Remove the belt (A) and put the new belt in position.
The belt tension should be according to the table, adjust if necessary.
fig.7769A
Remount the rear panel.
Connect the power to the machine.