22
7 Heating
7.1 Replacement of heating element
Disconnect the power to the machine.
Demount the front panel.
Remove the cover to the heating elements.
Disconnect the connectors to the heating elements.
Loosen the bolt to the heating element and gently push on the middle of the heating element to release the flange.
Remove the heating element and insert the new heating element.
Push on the middle of the heating element to get the flange in position.
Fasten the bolt. Use tightening torque 6 Nm.
Reconnect the connectors to the heating element, use the electric schematic supplied with the machine.
Service Manual
fig.7767
fig.7756