Electrolux W585S Service Manual page 39

Service Manual
39
Replacement of electrical drain valve
Disconnect the power to the machine.
Demount the front panel.
Remove the cover to the heating elements.
fig.7751B
Loosen the hose clamps and demount the hoses (A) from the drain valve. Check and clean the hoses if necessary.
Disconnect the wires (B) from the machine.
Loosen the bolts (C) and demount the electrical drain valve from the mounting plate.
Remove the cover (D) from the electrical drain valve and fasten the cover on the new electrical drain valve.
Mount the new electrical drain valve on the mounting plate and tighten the bolts.
Connect the wires (B).
Mount the hoses (A). Tighten the hose clamps.
Mount the cover to the heating elements.
Mount the front panel.