How To Install The Base Using The Latch System - Peg-Perego PRIMO VIAGGIO 4-35 NIDO Owner's Manual

How to install the Base using the LATCH SYSTEM

Open the lock off clip as shown
in the picture (a). Open the
front cover as shown in the
picture (b). Remove the two
latches from their housings;
push on the red button and pull the
connector out. Push on the adjuster
button to lengthen the strap as shown in
the picture (c).
Deploy the load leg until it clicks in the
down position and leans the base on
the seat (d). Level the base following the
procedure at page 27.
- 28 -