Rear Facing Mode Using Latch System - Peg-Perego Primo Viaggio SIP Convertible Instructions For Use Manual

Installing your child restraint in the vehicle
REAR FACING MODE USING
2
A
LUAS STRAPS
1. Recline the child restraint to the rearfacing
position as shown in the picture. To recline
the child restraint, pull the handle located
B
below the front edge of the shell (A)as shown
in detail. An audible "click" is heard when
the seat is properly locked into position.
2. Disconnect the latch straps from the
A
storage bar by pushing on the red button
and pulling the straps at the same time.
3. Disengage the rebound bar under the
seat and rotate it until it clicks in position as
shown in picture.
4. Slide the straps toward the front of the
child restraint. Check that the straps are not
reversed. Lean the reclined seat, unoccupied,
on the selected vehicle seat in the rearfacing
mode making sure that the front part of the
seat touches the vehicle seat backrest.
- 24 -