Rear Facing Mode Using Latch System - Peg-Perego Primo Viaggio SIP Convertible Instructions For Use Manual

Installing your car seat in the vehicle

REAR FACING MODE USING LATCH SYSTEM

2
A
1. Recline the child seat to the rearfacing position
as shown in the picture. To recline the seat, pull
the handle located below the front edge of
the shell as shown in detail. An audible "click"
B
is heard when the seat is properly engaged.
2. Disconnect the latch straps from the
storage bar by pushing on the red button
A
and pulling the straps at the same time.
3. Pull the free straps out of the openings
located on the seat structure and free them of
any entauglement. Check that the straps are
not reversed.
4. Lean the reclined seat, unoccupied, on
the selected vehicle seat in the rearfacing
mode making sure that the front part of
the seat touches the vehicle seat backrest.
- 22 -