Use Of A Locking Clip - Peg-Perego PRIMO VIAGGIO 4-35 NIDO Owner's Manual

Use of a Locking Clip

Installation this car seat without base
follows the same rules as with base
regarding the availability of different
types of vehicle seat belts.
Important! For different types of seat
belts, please refer to page 16 and on.
This car seat should not be installed on
seat types shown on page 24.
B
Should your vehicle belt need a locking
clip, a standard one can be purchased
in specialized retailers or through Peg-
A
Perego Customer Service.
To install the locking clip, hold the
shoulder strap and lap belt together just
above the buckle. Unbuckle the belt while
holding the straps. Hook the locking clip
around both straps as shown.
Leave 1/2 inch (1,3 cm) space between the
clip and latch. Re-buckle the belt.
- 42 -