Table of Contents
Advertisement
4. During Windows Setup, continue to the dialog where you select the drives on
which to install Windows. If the disk you want to use is not listed, click on "Load
driver" link at the bottom left corner.
To load the driver, browse the USB flash drive for the proper driver files.
•
For RAID, choose the SATA/sSATA RAID driver indicated then choose the
storage drive on which you want to install it.
•
For non-RAID, choose the SATA/sSATA AHCI driver indicated then choose
the storage drive on which you want to install it.
5. Once all devices are specified, continue with the installation.
6. After the Windows OS installation has completed, the system will automatically
reboot multiple times.
Chapter 5: Advanced Serverboard Setup
Figure 5-6. Load Driver Link
5-25
Advertisement
Table of Contents
