Supermicro SUPERSERVER 6028U-T Series User Manual page 59

NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin definitions.
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin definitions.
HDD LED/UID Switch
The HDD LED/UID switch connections
are located on pins 13/14 of JF1.
Attach an LED cable to display HDD
activity. Attach a cable to pin 13 to use
UID button. See the table on the right
for pin definitions.
NIC1/NIC2 LED
The NIC (Network Interface Controller)
LED connections for GLAN port 1 are
located on pins 11 and 12 of JF1, and
the LED connection for GLAN Port 2
are on pins 9 and 10. Attach the NIC
LED cables here to display network
activity. Refer to the table on the right
for pin definitions.
Note: The NIC LED connections for
10G_LAN Ports 3/4 is located on
LED1.
Chapter 5: Advanced Serverboard Setup
Pin Definitions (JF1)
Pin#
19
20
Pin Definitions (JF1)
Pin#
15
16
HDD/UID Switch
Pin Definitions (JF1)
Pin#
13
14
GLAN 1/2 LED
Pin Definitions (JF1)
Pin#
9
10
11
12
5-15
NMI Button
Definition
Control
Ground
Power LED
Definition
3.3V
PWR LED
Definition
UID Switch
HDD Active
Definition
NIC 2 Activity LED
NIC 2 Link LED
NIC 1 Activity LED
NIC 1 Link LED