Supermicro SUPERSERVER 6028U-T Series User Manual page 47

3. W ith the sec ond lever f ully
retracted, gently push down on
the "Open 1st" lever to loosen the
load plate. Lift the load plate with
your fingers to open it completely.
4. Pop the plastic c ap marked
"Warning" out of the load plate.
5. Holding the CPU carefully above
the socket, orient the CPU so
that all keys and edges will fit the
socket.
6. Carefully lower the CPU straight
down into the socket. Do not
move the CPU horizontally, and
do not rub the pins of the socket.
This may damage the CPU or the
socket.
Caution: You can only install the CPU into the socket in one direction. Make sure
that the CPU is properly inserted into the socket before closing the load plate. If it
does not close properly, do not force it as it may damage your CPU. Instead, open
the load plate again and double-check that the CPU is aligned properly.
Chapter 5: Advanced Serverboard Setup
Open the load
plate.
IMPORTANT!
5-3