Table of Contents
Advertisement
Installation
Floor Mounting the Unit (Alternate Method)
Step 1: The unit has 44 x 12mm deep
fixing holes on the underside suitable
for a No.6 screw. The holes are
configured to allow fitment of most
standard kitchen foot types (not
supplied).
Step 2: Mount your chosen foot type to
the underside of the unit using
appropriate fixings.
Step 3: Adjust your chosen foot type to
ensure the base of the unit is horizontal
in both axis.
It is recommended that where possible,
the wall bracket is used in conjunction
with any floor mount solution to prevent
the unit from tipping.
Step 4: Mark the wall bracket position
using the dimensions shown. Note the
position of the top of the unit in relation
to the wall bracket. Ensure the bracket
position is parallel to the floor.
Step 5: Attach the wall bracket to the
wall or batten using appropriate fixings.
(As shown on page 19)
Step 6: Lift the unit and locate the two
hooks on the rear onto the wall bracket
prior to fixing the unit to the floor. (As
shown on page 19)
22
Base fixing holes
11 x 4
Top of unit
MVHR Installation and User Guide 476930
Advertisement
Table of Contents
