Table of Contents
Advertisement
Installation
Wall Mounting the Unit
Step 1: Mark the wall bracket position
using the dimensions shown. Note the
position of the top of the unit in relation
to the wall bracket. Ensure the bracket
position is horizontal.
Step 2: Attach the wall bracket to the
wall using appropriate fixings.
Step 3: Lift the unit and locate the two
hooks on the rear onto the wall bracket.
Step 4: Make sure the unit is level or
leaning slightly backwards; this is to
ensure the condensate drain functions
correctly.
The mounting feet at the base of the unit
are adjustable. From the factory, the
mounting feet are set to compensate for
the standoff caused by the mounting
bracket. Adjust the feet in or out to level
the unit as necessary.
If mounting on uneven walls, the
spacers (A) may need to be removed
before the feet can be screwed further
into the unit.
Lock the mounting feet into their final
position using the M6 nuts (B).
20
Top of unit
A
B
MVHR Installation and User Guide 476930
Advertisement
Table of Contents
