Table of Contents
Advertisement
Maintenance
Maintenance
Filter Maintenance
Heat recovery units require regular maintenance.
This unit has been designed to facilitate access to enable maintenance to be carried out easily.
When the unit displays "Clean or replace
filters". This is a reminder to ensure that
the filters are not so dirty that they are
blocking the airflow or allowing dirt to pass
through. The rate at which the filters
become dirty will vary hugely depending
on the environment and the activity within
the property.
See page 61 for a list of spare filters.
1. Open the filter drawers by pressing the
finger plate upwards and sliding the drawer
out.
2. Lift each filter out and clean gently by
tapping or carefully using a vacuum
cleaner if necessary.
3. Replace the filters
4. Close the filter drawers, ensuring the
latches have clicked back into the locked
position.
5. After maintenance of the filters, the filter
timer can be reset by going to
Settings/Performance,
Clean/Replace filter.
14
MVHR Installation and User Guide 476930
Advertisement
Table of Contents
