Table of Contents
Advertisement
Accessories
WiFi Controller
The WiFi controller is a plug & play accessory that fits next to the control module. It allows the user instant
access to commissioning, configuration, direct monitoring and control of the MVHR unit, using a smart phone
or tablet with the Vent-Axia Connect app, available from the iTunes Store or on Google Play.
Device Compatibility
iOS
The app is compatible with the following iOS devices:
•
iPhone 4s (or newer)
•
iPod touch (5th generation or newer)
•
iPad (3rd generation or newer)
Android
The app is compatible with most Android devices equipped with Bluetooth 4.0 and running Android 4.3 (Jelly
Bean) or later
.
Installation
Installation must be carried out by a competent person.
Installation may be carried out without removing power from the
unit, provided no screws are removed.
Step 1: Remove the outer cover by pressing the tabs either
side of the control module and lifting the cover outwards from
the bottom edge.
Step 2: Insert WiFi module into slot to the left of the
touchscreen control module.
Step 3: The WiFi controller status LED illuminates when the
module is fitted correctly.
Step 4: Connect phone or tablet device to WiFi network using
the AP SSID (network name) indicated on the WiFi controller.
Status LED will indicate
green
Step 5: Use the app to connect to the unit, either using the
phone camera, or entering the device name and
security key indicated on the WiFi controller label.
Step 6: Replace outer cover.
44
when connected.
•
iPad mini
•
iPad air
MVHR Installation and User Guide 476930
Advertisement
Table of Contents
