Product Installation 1 - Midea i5C User Manual

Applicable to Google Assistant & Amazon Alexa:
EN
Skill Name for Google Assistant
"MSmartHome"
NOTE
For using Google Assistant and Amazon Alexa, please make sure MSmartHome APP has
been downloaded and matched with your robot successfully.
Step1. Download MSmartHome APP and link your robot successfully.
Step2. Get your Amazon Alexa or Google Assistant device ready.
Step3. By searching skill name above to link voice device and your robot.
(MSmartHome account need to be registered in the process)
Step4. Voice-control your robot by using voice commands in the description.
start
start <robot name>
turn on <robot name>
Google
switch on <robot
name>
Alexa turn on <robot name>
Skill Name for Amazon Alexa
"MSmartHome"
stop charge
stop <robot name> dock <robot name>
<robot name> go home
<robot name> go
name> charge
set charge mode on
11
PRODUCT INSTALLATION
Installation of Charging Base
1. Make sure the power cable is connected into the charging base.
2. Place the charging base flat against a wall and make sure there leaves enough space
to the base, as shown in the figure below.
3. Ensure the charging base is connected to a power supply.
Installing the Side Brushes
1. Turn the unit over.
2. Attach the side brush to the matching post and press down until they fit into place.
3. Ensure side brushes can rotate freely.
12
EN