Midea i5C User Manual page 12

3. The filter is on the side of the dustbin.
Remove debris by tapping the filter
against your garbage bin.
You can clean the filter with water,
but remember to dry it
THOROUGHLY before reinserting
it back into the dustbin.
EN
Cleaning the Water Tank
1. Once finished mopping, press the water tank release button and pull to remove the
water tank. Detach the mop cloth holder by pulling them apart.
2. Wash the mopping cloth and dry THOROUGHLY.
3. Open the cover and pour out the remaining water in the water tank.
4. Reinsert the dustbin back in
the robot.
It is recommended to clean the
filter element every week and
replace it every 1-3 months.
21
4. Wipe dry the water tank. Exposure to sunlight is not recommended.
Cleaning the Sensor and Wheel
Wipe the sensors and wheels gently with a dry, soft cloth, as shown in the figure.
Cleaning the Charging Contacts
Wipe the charging contacts on both the robot and the charging base with a dry,
soft cloth, as shown in the figure.
22
EN