Advertisement
Quick Links
VACUUM CLEANER
OPERATION INSTRUCTIONS MANUAL
VCS38A13L
Jiangsu Midea Cleaning Appliances Co.,Ltd
No.39 Caohu Avenue, Xiangcheng Economic
Development Zone, Suzhou , Jiangsu Province, 215131, P.R.C
http://www.midea.com/global
Please read this Instruction Manual carefully before operating, and keep it properly.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Midea VCS38A13L
Summary of Contents for Midea VCS38A13L
- Page 1 VACUUM CLEANER OPERATION INSTRUCTIONS MANUAL VCS38A13L Jiangsu Midea Cleaning Appliances Co.,Ltd No.39 Caohu Avenue, Xiangcheng Economic Development Zone, Suzhou , Jiangsu Province, 215131, P.R.C http://www.midea.com/global Please read this Instruction Manual carefully before operating, and keep it properly.
- Page 2 8. Keep the power cord away from sharp objects to Safety Introduction prevent it from being damaged. Contents Product Introduction 9. To prevent fires do not immerse the vacuum Product Operation cleaner in water, do not expose it to any heating Product Maintenance appliances.
- Page 3 Product Introduction Main Body Dust Cup Hose Extension Tube Main Brush Combination Tool Note: all parts are assembled in the direction of the arrow, and the combination of the suction brush and the small can be used directly in the pipe or metal tube.
- Page 4 Product Operation Brush use: Press the pedal button and the bristles will stick out. Product use Press Bristles stick out Composite brush use: According to the direction of arrow, 45 ° rotating brush out. Pull Pull out the power cord to connect the power supply: When you see the red mark on the power cord, do not pull out the cord outward.
- Page 5 Product Maintenance Product Maintenance Dust cup cleaning Dust cup maintenance Remove the dust cup: Press the dust bucket release button, gently pull the dust bucket Open the dust cup: handle, then remove the dust bucket. Lift the lid on the release button to open the lid, then take out the internal parts. Push Remove the dust cup...
- Page 6 TROUBLESHOOTING Install the filter core: In case of malfunction, please refer to the following table After cleaning, put the filter into the dust cup and notice the direction of the arrow. Problem Possible reason Solution The vacuum - The power plug is not properly plugged into - Reinsert the plug cleaner does not the socket...
Need help?
Do you have a question about the VCS38A13L and is the answer not in the manual?
Questions and answers