Table of Contents
Advertisement
8. Repeat steps 5 to 9 of 2.2.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
3 Menu Description
Purpose:
Call the menu by clicking button
or call preset No.95.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor shown as the Figure 3-1.
2. Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
preset No. 95.
5. Click the direction arrow to control the camera.
(1) Click up/down direction button to select the
item.
(2) Click Iris + to confirm the selection.
(3) Click left/right direction button to adjust the
value of the selected item.
Figure 2-15 Fix the Gang Box
Figure 3-1 Connection
on the PTZ interface,
button, or call
Advertisement
Table of Contents
