HIKVISION TURBO HD H1T Series User Manual page 9

2.2.2 Ceiling/Wall Mounting with JunctionBox
Note:
You need to purchase a junction box separately if you
adopt the mounting with a junction box
Steps:
1. Paste the junction box's drill template on the
ceiling/wall.
2. Drill screw holes and the cable hole in the
ceiling/wall according to the holes of the drill
template.
Figure 2-12 Drill Template of the Junction Box
3. Refer to step 3 of 2.2.1 Ceiling/Wall Mounting
without Junction Box to take out the camera's main
body.
4. Take apart the junction box, and align the screw
holes of the camera with those on the Junction box'
cover.
5. Fix the camera on the junction box's cover with
three PM4 × 10 screws.
Figure 2-13 Secure Screws on Junction Box's Cover
6. Secure the junction box's body on the ceiling/wall
with four PA4 × 25 screws.
Figure 2-14 Secure the Junction Box's Body on Wall or
7. Combine the junction box cover with its body by
tightening four screws on junction box's cover.
Figure 2-11 3-axis Adjustment
Pan Position Range
[0° to 360°]
Tilt Position Range
[0° to 75°]
Rotation Position Range
[0° to 360°]
Ceiling
.