TURBO HD D(F)7T Series Dome Camera User Manual UD00355N User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to the D7T series dome cameras. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice.
Privacy Notice Surveillance laws vary by jurisdiction. Check all relevant laws in your jurisdiction before using all this product for surveillance purpose to ensure that your use of this product conforms. Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules.
1 Introduction 1.1 Product Features This series of camera adopts high performance sensor and advanced circuit board design technology. It features high resolution, low distortion, and low noise, etc. It is suitable for surveillance system and image process system. The main features are as follows: ...
2 Installation Before you start: Please make sure that the device in the package is in good condition and all the assembly parts are included. Make sure that all the related equipment is power-off during the installation. Check the specification of the products for the installation environment.
: T y p e I I C a m e r a Type I Camera: Figure 2-3 Fix the Camera to the Ceiling 6. Connect the video cable to the monitor and connect the power cable to the power supply. 7.
Page 6
Figure 2-5 Install the Mount 3. Route the cables through the hole of in-ceiling mount and connect the corresponding cables. 4. Fix the camera to the in-ceiling mount with the supplied screws. Type II Camera: Type I Camera: Figure 2-6 Fix the Camera to the Mount 5.
Mounting with Inclined Base of Type I Camera Steps: 1. Install the inclined base to the ceiling with supplied screws, as shown in Figure 2-9. Figure 2-9 Fix the Inclined Base 2. Route the cables through the hole of in-ceiling mount and connect the corresponding cables.
3.1 Format Move the cursor to FORMAT, and press the menu button to enter the FORMAT sub menu. You can set the format of camera and confirm. 3.2 Focus Move the cursor to FOCUS, and press the menu button to enter the FOCUS sub menu. Move the cursor to adjust the camera lens by the FOCUS+, FOCUS-, ZOOM+ and ZOOM-.
3.3.3 WB (White Balance) White balance is the white rendition function of the camera to adjust the color temperature according to the environment. It can remove the unrealistic color casts in the image. You can set WB mode as ATW, and MWB.
VIDEO SET TING CONTRAST SHARPNESS COLOR GAIN DEFAULT MIRROR RETURN Figure 3-5 Video Setting CONTRAST This feature enhances the difference in color and light between parts of an image. You can set the CONTRAST value from 1 to 10. SHARPNESS Sharpness determines the amount of detail an imaging system can reproduce.