PDi CV2600 Quick Start Manual page 10

Better Solutions Are Within Reach
If you want to rename the file, press the CH▲ or CH▼ to highlight the file name, otherwise go to step 6.
5.
Press ◄ or ► to highlight each character
a.
Press ▲ or ▼ to change each character.
b.
c. Repeat this process until you have the desired file name. Up to 8 characters may be used.
When done, press ◄ until the characters are no longer highlighted.
d.
Press CH▲ or CH▼ to highlight Save.
6.
Press VOL► to initiate.
7.
Wait for the Cloning Main Menu to say "setting saved to USB", then press◄ to go back to main menu.
8.
9. Remove the USB Disk from the TV.
Restore Setting to TV
1. Turn the TV On.
2. Insert a Flash Drive (user provided) into the USB Clone
Port located adjacent the Cable TV Jack.
When the Cloning Main Menu appears, press CH▲ or
3.
CH▼ to highlight Restore Setting to TV.
Press VOL► to initiate.
4.
5. When the Restore Settings to TV menu appears, press
CH▲ or CH▼ to highlight the appropriate model.
Press VOL► to initiate.
6.
7. Wait for the Cloning Main Menu to reappear. You will get a
confirmation screen. Press ▲ to continue or ◄ to go back.
8. The TV will restart after settings are restored.
9. Remove the USB Disk from the TV.
10. Verify correct setup of the TV.
*To exit cloning menu, you must remove the thumb drive.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the use's authority to operate the equipment.
Additional Assistance
PDi Communication Systems, Inc.
40 Greenwood Lane
Springboro, Ohio 45066 USA
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 800-628-9870 FX 937-743-5664
MODEL NUMBER:
CV2600, CV3200
Healthcare LCD TV
TM
WEB: http://www.pdiarm.com
PH: 800-628-9870
Document Number:
PD196-241R2
Page 9 of 9