MAINTENANCE AND SERVICING Never remove the back cover of the TV; this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call an authorized service center or PDI . CLEANING AND DISINFECTION Clean the exterior of this television by removing dust with a lint-free cloth.
• Consult the dealer or an experienced radio/TV technician for help. Underwriters Laboratories The model PDI-P22LCDC Hospital Grade LCD TV is a specialized LCD television. This TV is intended for entertainment and educational purposes for use in a hospital, a nursing home, a medical-care center, or a similar health care facility.
Dolby Laboratories. All other brand names and product names used in this manual are trademarks, registered trademarks, or trade names of their respective holder. PDI and Better Solutions Are Within Reach are registered trademarks of PDI Communication Systems, Inc., Springboro, Ohio.
Contents WARNINGS Note to Cable TV Installers………………………………………………………………………………………….3 Maintenance and Service……………………………………………………………………………………………3 Cleaning and Disinfection…………………………………………………………………………………………...3 Service Instructions………………………………………………………………………………………………..…4 Product Modification………………………………………………………………………………………………….4 REGULATORY INFORMATION FCC………………………………………………………………………………………………………………..…...4 Underwriters Laboratories………………………………………………………………………………………..….4 Important Safety Instructions………………………………………………………………………………………………..…..5 Copyright …….……………………………………………………………………………………………………………...……5 Disclaimer………………………………………………………………………………………………………..………………..5 Trademarks …………….…………………………………………………………………………………………………...……5 Supplied Accessories…………………………………………………………………………………………………….……...8 Optional Accessories…………………………………………………………………………………………………………….8 Battery Installation ……………………………………………………………………………………………………………….8 CONTROLS Front Panel……………………………………………………………………………………………………………9 Rear Panel…………………………………………………………………………………………………………..
Page 7
Contents SOUND CONTROL Equalizer…………………………………………………………………………………………………..………..29 Sound Status Memory…………………………………………………………………………………..……….…30 Balance………………………………………………………………………………………………..……………..30 AVL……………………………………………………………………………………………………..…………….30 Surround………………………………………………………………………………………………..……………30 Minimum Volume…………………………………………………………………………………………..………..31 Maximum Volume………………………………………………………………………………………….……….31 Power On Volume…………………………………………………………………………………….…………….31 Internal Speaker Enable………………………………………………………………………..…..……………...32 Composite / S-Video Sound Mode……………………………………………………………….……………….32 CHANNEL SETUP Signal…………………………………………………………………………………………………………………33 Auto Program………………………………………………………………………………………………………..34 Add / Delete Channels……………………………………………………………………..….……………………35 Clear Service Level……………………………………………………………………………………………..…..37 Copy Service Level……………………………………………………………………………….…..…………….38 Parental Control……………………………………………………………………………………………………..39 PARENTAL CONTROL TV Rating……………………………………………………………………………………………….…..………..40...
Supplied Accessories Make sure the following accessories are provided with product. Optional Accessories Programming Remote Patient Remote PD108-420 PD108-421 A programming remote control In addition to pillow speaker is required to perform all TV control of the TV, a patient setup adjustments including remote control is also programming channels.
Controls Front Panel 1 Power Indicator Illuminates in red when the TV is off. Illuminates in green when the TV is switched on. 2 Power ON/OFF Switches TV set on or off. 3 CC Sets the caption function. CH ▲ (Channel Down/Up) ▼...
Control ! CAUTION ! Rear Panel Moving this switch changes the voltage supplied to the pillow speaker. Make sure it is set correctly BEFORE plugging in the pillow speaker jumper cable. Failure to do so WILL RESULT IN THE PILLOW SPEAKER BEING OVERDRIVEN AND POSSIBLE DAMAGE TO...
Programming Remote Control A programming remote control is required to perform all TV setup adjustments including programming channels. The remote is NOT included with the TV and must be ordered separately – one remote is capable of programming an entire hospital of televisions. Please order programming remote control part number PD108-420.
Remote Control 10 OK Accepts your channel selection. Displays digital channel information. 11 VOL ◄► Adjusts the sound level. Adjusts menu settings. 12 CC Sets the caption function. 13 ARC Changes the aspect ratio. Repeatedly press the ARC button to select a desired picture format.
OSHPD (State of California Only) The combined weight of the PDI-P22LCDC TV and PDI wall mount totals less than 20 pounds. At the time of this writing, the involvement of a written, submitted, reviewed, and approved plan by OSHPD is not required to install the PDI-P22LCDC TV in the state of California.
Wall Mounting on Bracket 1. Refer to Figure 1. Select a location on the wall approximately 8 inches below the ceiling. NOTE: Do not locate AC, Across-Room Wiring, and CATV Signal outlets below the Wall Bracket’s location as it will cause clearance issues and interfere with the TV’s cabinet when mounted to the bracket.
Page 15
Wall Mounting on Standard Bracket Back Mount M4 x 6mm Screws (4) Wall Mount Pilfer Screws (2) CATV Coax Connector (Coax Not Shown) AC Power Cord Pillow Speaker Jumper Note: Make sure the pillow speaker selection switch is set to the correct setting before plugging in the jumper.
Across-Room Wiring A ¼” stereo style pillow speaker (pendant control) jack is located on the TV’s connector panel on the backside. This TV is designed to work with either a digital pillow speaker that generates digital style control codes or a single-button analog (switch-style) pillow speaker. A rear panel mounted switch allows use of different brands of pillow speakers and supports the major brands;...
Connections Antenna “ANT” Connection CAUTION: Some hospital cable systems provide power voltage on the coaxial cable. This TV is NOT designed to be powered via a coaxial cable. Do not connect to a powered coaxial cable. Damage will result to the TV. Hospital Coax Cable A/V IN Connects composite video, and stereo or mono audio from devices such as VCR’s, DVD’s, and...
Connections S-VIDEO Connection If the external equipment you connect has an S-VIDEO jack, you can use an S-VIDEO cable for improved picture quality (compared to an A/V cable). 1. Connect the VCR’s S-Video output directly to the TV’s S-VIDEO connector. 2.
Connections AUDIO OUT Audio from the current selected device can be outputted to an amplifier, external speakers, or other similar device. Use an audio cable to connect the television’s AUDIO OUT jacks to the external devices input jack. 2. Activate the device. Pillow Speaker The pillow speaker (pendant control) jack is located on the TV’s connector panel.
Page 20
Connections HDMI 1 / 2 INPUTS Two separate inputs are available for High Definition Multimedia Interface (HDMI) style signals. 1. Connect the HDMI output from the external device to either HDMI1 or HDMI2 on the 2. The external device’s audio may be connected via the HDMI port, PC audio, Component 1 audio, or Component 2 audio inputs.
Page 21
Connections PC IN The TV can also be used as a computer monitor. Connect the computer’s video cable to the PC IN D-SUB socket on the set. Connect the computer’s audio cable to the PC-AUDIO jack on the set. 3. Verify that PC-ANALOG is enabled in the “Source Setup” menu. Please see “Source Setup”...
Basic Operation Indicator Receiver Light Window Turning the TV On and Off 1. Connect the AC power cord to the TV. A front mounted indicator light will illuminate Red indicating the TV has power, but is currently off. 2. Press the POWER button on the remote control, or the TV’s ON/OFF button, or the pillow speaker’s TV power button.
Basic Operation On Screen Menu Language Selection You can adjust the language used in displaying the (OSD) on screen display. 1. Press the SETUP button on the remote control. 2. Press the CH▲ / CH▼ button to select the OSD Language menu. 3.
On Screen Menus and Displays The TV is programmed using the Menus. 1. Press the SETUP button on the IR remote control to display the main SETUP menu. 2. Press the CH▲ / CH▼ buttons to select a menu item. 3.
Picture Adjustment of picture Brightness, Contrast, Color, Tint, Color Temperature and Sharpness is available to customize the levels you prefer using the on-screen menus. Alternately, PDI factory preset picture modes can be selected using the remote control. 1. Press the MENU button to display the SETUP menu.
Picture Controls Color Temperature The color temperature menu appears only when the P22LCDC is in TV, Composite Video, or S-Video modes. “Standard”, “Reddish”, “Greenish”, “Bluish” color temperatures are available for selection, however the individual colors are not adjustable. The “USER” setting allows individual adjustment of each of the TV’s primary colors.
Picture Controls Component Input Picture When the TV’s source is set to Component Input additional picture adjustments are available. Temperature Temperature is a measure of the warmth of an image. Two temperatures are available 6500K or 9300K. Document Number: PD196-124 Rev 1...
Sound Control Sound The Sound menu allows very precise adjustment of several sound parameters. Balance Adjusts the sound balance from the left and right speakers mounted in the TV. Balance has no effect on the pillow speaker sound. 1. In the Sound menu, press the CH▲ / CH▼ button to select Balance. 2.
Sound Control Internal Speaker Enable The speaker’s inside the TV’s cabinet can be turned on or off for either different TV Service Level or Source modes. Note: Sound to an attached pillow speaker remains on at all times. 1. In the Sound menu, press CH▲ / CH▼ button to select the Internal Speaker Enable menu item.
Channel Setup Channel Setup The TV offers three different programmable channel banks or Service Levels. Programming is only accomplished using the handheld remote control. Signal Four different tuning types are available depending upon the healthcare facilitie’s signal style. Selection of the correct signal type is required for the TV to recognize all possible channels and before any channel programming can begin.
Channel Setup Auto Program The TV automatically scans each available channel for activity. Channels that display activity are memorized into the selected Service Level. 1. Press the SETUP button to display the SETUP MODE menu. 2. Press the CH▲ / CH▼ button to select Mode. 3.
Channel Setup Add / Delete Channels Individual analog TV channels that are missing can be added to a Service Level. Or, analog TV channels that require deletion can be removed from a Service Level. Currently registered Digital channels can be enabled or disabled in each service level. 1.
Page 33
Channel Setup The Add/Delete Channels menu provides access to both Analog and Digital Channels. 6. Press VOL◄ / VOL► button to select the Analog Channel number. Then press the CH▲ / CH▼ buttons to select Add/Delete Analog Channel. Use the VOL◄ / VOL► button to select Added or Deleted.
Channel Setup Clear Service Level Empties a service level of all programmed channels leaving it blank. 1. From the Channel Setup menu, press the CH▲ / CH▼ buttons to select Clear Service Level menu. 2. A listing of service levels are shown with the current programmed status.
Channel Setup Copy Service Level Copies one service level of another. 1. From the Channel Setup menu, press the CH▲ / CH▼ buttons to select Copy Service Level menu. A Copy Service Level menu appears and shows a source (From) and destination (To) Service Level.
Page 36
Channel Setup Parental Control A parental control feature is available to restrict and block undesirable programs from appearing on the TV. This feature is of particular importance for televisions installed in pediatric wards. If the Parental Lock is Enabled in Parental Control menu, an Enter Password screen will appear. The default setting is Disabled.
Parental Control TV Rating Most television programming is now rated. TV Rating allows the TV to selectively present only programming content that is unblocked per its preset level. A program that is blocked, displays a black screen only. 1. In the Parental Control menu, press the CH▲ / CH▼ button to select the TV Rating menu. Then press the VOL◄...
Parental Control MPAA Rating Most televised movies are now rated. MPAA Rating selectively allows the TV to only present movie content that is unblocked per its preset level. 1. In Parental Control menu, press the CH▲ / CH▼ button to select the MPAA Rating menu. And then press the VOL◄...
Block Hours sets the amount of time in hours you want Parental Control Active. Parental Lock With Parental Lock On, the Parental Function is active. Turn off to disable Parental Control. Downloadable Rating This feature is not available for the PDI-P22LCDC model. Document Number: PD196-124 Rev 1...
Movie & TV Rating Systems MOTION PICTURE ASSOCIATION OF USA (MPAA) RATING SYSTEM TV PARENTAL GUIDELINE RATING SYSTEM NOTE The V-Chip will automatically block certain categories that are ‘more restrictive’. If you block TV-Y category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the categories in the ‘young adult’...
Channel Setup Power On Channel Displays a fixed channel each time the TV is turned on. This feature is useful for hospitals that have a Welcome Channel and wish to have it displayed upon initial use of the TV. The patient can then tune to any other available channel. 4.
Channel Setup Channel Memory Override Prevents patients for tuning to a channel that is not memorized in the current Service Level memory. 1. From the Channel Setup menu, press the CH▲ / CH▼ button to select the Channel Memory Override. 2.
Source Setup Enabling / Disabling Sources The TV’s signal sources can be individually Enabled or Disabled. A TV that is switched to a non-connected source generates nuisance hospital maintenance calls of “TV Not Working”, when in fact the TV does work, but has been set to an inactive source. Please Disable all of the TV’s sources that are not to be used.
Features The Features menu provides adjustable settings that customize the TV to your hospital. Power On Captions Mode Power On Captions Mode memorizes the caption setting upon powering the TV off. Power On Captions Mode = Off, the TV will always power on with captions disabled. Power On Captions Mode = Last, the TV powers on with the last caption’s setting.
Features Power Management The TV will automatically power off after a specific period of viewer inactivity providing energy savings. 1. In Features menu, press the CH▲ / CH▼ button to select Power Management. Press the VOL◄ / VOL► button to determine active time.
Features Digital Mode Time Setup The current time will be set automatically from a digital channel signal provided by a broadcasting TV station. 1. In Features menu, press the CH▲ / CH▼ button to select Digital Mode Time Setup. 2. Press the VOL◄ / VOL► button to select your viewing area time zone; Pacific, Alaska, Hawaii, Newfoundland, Atlantic, Eastern, Central, Mountain.
Features Channel Up Power Off This feature causes the TV to turn off once it reaches the highest numbered (last) channel and is usually used with single button style pillow speakers. When the feature is disabled, the TV will continue on to the lowest channel and not turn off.
Page 48
Features Digital Fonts Options Customization of Teletext message text is possible. NOTE: Teletext is not utilized in the USA. 1. In Features menu, press the CH▲ / CH▼ button to select Digital Font Options. 2. Select the desired Font attribute and adjust using the VOL◄ / VOL► button.
OSD Language On Screen Menu Language Selection You can adjust the language used in displaying the (OSD) on screen display. 1. Press the SETUP button on the remote control. 2. Press the CH▲ / CH▼ button to select the OSD Language menu. 3.
Page 50
Source Setup Changing the Source Input The TV can be switched to other display modes such as VCR, DVD, PC, or other externally connected devices. The source(s) must be enabled for the input to function. 4. Press the SETUP button on the remote control. 5.
FM Radio FM Radio Setup You can listen to FM radio stations that are combined with the cable TV signals using this TV. IMPORTANT: The FM radio source must be enabled in the SOURCE SETUP menu before using the FM Radio setup menu. Auto Program 1.
Troubleshooting PROBLEM CHECK • Make sure the TV set is powered – Power No Picture on Screen, No Sound from indicator is Red. • Speakers Turn on the TV using the “ON/OFF” power button. • Check the Brightness setting of the TV. •...
PDI factory in Springboro, Ohio. All shipments shall be F.O.B. Springboro, Ohio, and all shipping and freight charges to PDI’s factory shall be paid by the customer. This warranty shall not apply to any PDI products subjected to improper use, negligence or accident;...
Need help?
Do you have a question about the PDI-P22LCDC and is the answer not in the manual?
Questions and answers