H&S 6128 Operator's Manual page 27

PICKUP SPEED
The pickup speed on the Merger can only be
changed by varying the tractor PTO speed. For best
results, adjust the pick-up speed with the tractor rpm
to match the ground speed.
CROSS CONVEYOR SPEED
The cross conveyor speed on the Merger can only
be changed by varying the tractor PTO speed.
The speed relationship between the pickup and
the cross conveyor is preset for an all around
optimum performance level.
CROSS CONVEYOR BELT
ADJUSTMENT
NOTE: Cross Conveyor Belts
should be checked for correct
tracking frequently in the first 300
acres, then daily thereafter.
To adjust belt tracking;
1. Loosen the 2 bolts (A) that allows the
belt tracking adjustment slide to move.
2. Adjust the jam nuts either way to set
the belt tracking (B)
3. Tighten the (2) bolts (A) after the belt
tracking is set.
ADJUSTMENTS
-25-
(B)
(A)