Table of Contents
Advertisement
ANNUAL SERVICE
Cam Bearings
Depending on the acres per year, and field conditions,
the cam follower bearings should be replaced at the
end of each season. They are a wear item. The outside
diameter will become smaller and the bearing may fail.
Replacing the bearings before failure will lengthen the
life of the cam tracks.
Tine Bar Bearing
Tine bar bearing should be inspected at the end of
each season. They are a wear item. The two piece
nylon insert was made easy to replace. Replacing
these on a annual basis will insure longer tine bar life.
Cross Conveyor Belts
The cross conveyor belts should all be removed at the end of each season and the inner frame work
thoroughly cleaned of build-up and debris. This will ensure proper operation the next season.
SERVICE
-28-
Advertisement
Table of Contents
