Table of Contents
Advertisement
• FTM-400XDR/DE or FTM-400DR/DE
(1) Press and hold the [DISP(SETUP)] key to open the setup menu.
(2) Touch [GM].
(3) Touch [3 RADIO ID CHECK].
The RADIO ID is displayed.
• FTM-300DR/DE
(1) Press and hold the [F(SETUP)] key to open the setup menu.
(2) Rotate the DIAL knob to select "GM" and then press the DIAL knob.
(3) Rotate the DIAL knob to select "3 RADIO ID CHECK".
The RADIO ID is displayed at the top of the screen.
• FTM-200DR/DE
(1) Press and hold the [F
(2) Rotate the DIAL knob to select "59 RADIO ID".
The RADIO ID is displayed at the bottom of the screen.
• FTM-100DR/DE
(1) Press and hold the [DISP(SETUP)] key to open the setup menu.
(2) Rotate the DIAL knob to select "6 GM" and then press the [DISP(SETUP)] key.
(3) Rotate the DIAL knob to select "4 RADIO ID CHECK" and then press the
[DISP(SETUP)] key.
The RADIO ID is displayed.
7. When registration is completed, an e-mail with the Node ID and the Room ID will be sent to the e-mail address.
Member registration is completed.
Completion of registration usually takes 2 to 3 business days.
Install latest WIRES-X software to the PC
• This is not necessary if the latest WIRES-X software (Ver. 1.540 or higher) is already installed on the PC to be used.
• The latest WIRES-X software must also be installed on the transceiver that is establishing the connected room or the
directly connected node station. (When WIRES-X software with Ver. 1.400 or higher is not installed, you cannot connect
to a portable node station.)
1. User login to the WIRES-X web site. Download and unzip
the "wx****en.zip" file of the latest WIRES-X software
(Ver.1.540 or higher).
2. Execute the "Install.exe" file in the unzipped folder.
The "WIRES-X Installer" window will appear.
3. Click [WIRES-X Software Setup].
] key to open the setup menu.
MENU
8
GM
1
DP-ID LIST
2
ﾚﾝｼﾞ ﾘﾝｶﾞｰ
3
RADIO ID
GM
57 DP-ID LIST
>
58
RANGE RINGER
59
RADIO ID
60
LOG LIST
Advertisement
Table of Contents
