Table of Contents
Advertisement
Function
Return to the transceiver setting screen
Enters the BACKTRACK screen
Enters the Set mode*
Displays the frequency display screen
Displays the Function menu Screen*
Selects the Transmission Power Level
Selects Speaker Mute
Disconnects a node or a room on the Internet
Squelch OFF
Adjusts the squelch level
*Some items in the Set mode and Function menu are automatically set for the Portable Digital Node function, so the
settings cannot be used.
Setting the speaker mute
The audio output of the speaker of the node station FT3D/FT2D transceiver cannot be muted, it cannot be set in
Direct Operation.
Press [A/B] key each time toggles the mute mode as follows.
MUTE OFF MUTE ALL MUTE TX MUTE RX MUTE OFF ・・・
MUTE OFF:
Disable mute.
MUTE ALL:
Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX:
Mute the received voice from the C4FM digital station.
MUTE TX:
Mute the voice from the node station on the Internet.
When the MUTE setting is enabled, the mute icon " " blinks at the top of the LCD.
When the frequency setting screen is displayed, the mute setting status is displayed for about 1 second on the screen
each time you press the [A/B] key.
Key or Dial
Press and hold the X key
Press the DISP key
Press and hold the DISP key
Press the V/M key
Press the V/M key and then touch [F MW] on the LCD screen
Touch [TXPWR] in the Function Menu Screen
Press the A/B key
Press and hold the BAND key
While MONI key is pressed
FT3D: Press the SQL key, then rotate the VOL knob
FT2D: Press the SQL key, then rotate the DIAL knob
30
Advertisement
Table of Contents
