Elektron Analog Heat +FX Quick Manual page 7

Hide thumbs Also See for Analog Heat +FX:
Table of Contents

Advertisement

WARNING!
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PRODUCT DAMAGE
Do not expose the unit to rain, moisture, dripping or splashing and also avoid placing
objects filled with liquid, such as vases, on the unit.
Do not expose the unit to direct sunlight, nor use it in ambient temperatures exceeding
40°C as this can lead to malfunction.
Do not open the casing. There are no user repairable or adjustable parts inside. Leave
service and repairs to trained service technicians only.
Do not exceed the limitations specified in the Electrical specifications.
SAFETY INSTRUCTIONS FOR THE POWER ADAPTER
The adapter is not safety grounded and may only be used indoors.
To ensure good ventilation for the adapter, do not place it in tight spaces. To prevent
risk of electric shock and fire because of overheating, ensure that curtains and other
objects do not prevent adapter ventilation.
Do not expose the power adapter to direct sunlight, nor use it in ambient temperatures
exceeding +35˚C (+96˚F).
Connect the adapter to an easily accessible electrical outlet close to the unit.
The adapter is in standby mode when the power cord is connected. The primary circuit
is always active as long as the cord is connected to the power outlet. Pull out the power
cord to completely disconnect the adapter.
In the EU, only use CE approved power cords.
7

Advertisement

Table of Contents
loading

Table of Contents