Table of Contents
Advertisement
Tweak MIX and DRIVE until you find a nice balance and the sound you want. If you want to
use the EQ, remember that only HIGH EQ affects the sound, since the low frequencies are
filtered out.
7. TECHNICAL INFORMATION
ELECTRICAL SPECIFICATIONS
Impedance balanced audio outputs
Main outputs level: +19 dBu
Output impedance: 440 Ω
Headphones output
Headphones out level: +19 dBu
Output impedance: 36 Ω
Balanced audio inputs
Input level: +19 dBu
Audio input impedance: 39 kΩ
Control inputs
Input level on tip: -5 V – +5 V
Supplies +5 V on ring
Accepts CV, Expression pedals, Foot
switches
Unit power consumption: 12 W typical
Compatible Elektron power supply: PSU-3c
24
HARDWARE
128 × 64 pixel OLED screen
MIDI In/Out/Thru with DIN Sync out
2 x 1/4" impedance balanced audio out
jacks
2 x 1/4" balanced audio in jacks
1 x 1/4" stereo headphone jack
2 x 1/4" control input jacks
48 kHz, 24-bit D/A and A/D converters
Electrically isolated hi-speed USB 2.0 port
Power inlet: Center positive 5.5 x 2.5 mm
barrel jack, 12 V DC, 2 A
PHYSICAL SPECIFICATIONS
Sturdy steel casing
Dimensions: W 215 x D 184 x H 63 mm (8.5"
x 7.2" x 2.5") (including power switch, jacks,
knobs, and feet)
Weight: approximately 1.5 kg (3.3 lbs)
100 x 100 mm VESA mounting holes. Use
M4 screws with a max length of 7.4 mm.
Maximum recommended ambient operating
temperature: +35˚C (+96˚F)
Advertisement
Table of Contents
