Table of Contents
Advertisement
5.11 PARAMETER EDITING
The four DATA ENTRY knobs are used to change the parameter values that you see on
the screen. (Some parameters also have dedicated knobs on the panel.) The physical
location of the knobs on the front panel corresponds to the layout of the parameters on
the screen.
•
The parameters are adjusted in larger increments if you press down the DATA ENTRY
knob while turning it. This feature makes it much quicker to sweep through a whole
parameter range.
•
Press [SETTINGS] + turn DATA ENTRY knob to quantize the parameter value to integers.
Press DATA ENTRY knob + [NO] to reset the parameter to the default value.
•
•
Press [PARAMETER] page key + [NO] to reset the selected parameter group to de-
fault values.
Use the [NO] key to exit an active menu, back to a higher level menu and to negate.
•
5.12 SCREEN INFORMATION
Parameter page
•
When on a parameter page, the title bar shows the name of the active parameter page.
This text is replaced by parameter names when turning the DATA ENTRY knobs or the
dedicated controllers.
Audio input meter
Trigger icon
Current Parameter
page graphical info
Current Parameter
page parameters
21
Advertisement
Table of Contents
