Setup Examples - Elektron Analog Heat +FX Quick Manual

2. Press [SETTINGS] and the select INPUT SENSITIVITY. Keep an eye on the audio
input meter and change the input sensitivity until you find a setting where the bar
reaches the vertical line but without clipping. The message "INPUT LEVEL TOO
HIGH" is displayed on the screen when the input level is too high, and clipping occurs.
3. Adjust the level at the sound source if needed.

3.3 SETUP EXAMPLES

The Analog Heat +FX is very well suited for use in both an analog setup and in a more digi-
tal environment. Here are a couple of examples of how you can use the Analog Heat +FX.
14
Optimal input level.
Too high input level.