Overbridge; Tips & Tricks; Stereo Phaser Effect - Elektron Analog Heat +FX Quick Manual

• The Audio Input meter displays the level of the incoming audio.
• The Trigger icon shows that the Envelope Follower, an external gate signal or manual
triggering has generated a trigger event.
• The graphical information varies depending on the current PARAMETER page.
• The PARAMETER page parameters show what the DATA ENTRY knobs control and
their current parameter values.

5.13 OVERBRIDGE

The Overbridge software suite allows you to use the Analog Heat +FX as a VST/AU/AAX
plug-in for analog distortion and filter processing in your DAW. It also has a librarian for a
clear overview of your presets and gives the ability to load, edit, and save them.
When using the Overbridge setup, the user interface for the Analog Heat +FX presents
itself as a plug-in window in your DAW. Browse through and organize presets. Access,
edit or automate parameters for sound shaping on screen. Always find your device preset
parameters in the same state as you left them when you return to your DAW project, with
the useful total recall functionality.
Read more about Overbridge use and availability on the Elektron website: https://www.
elektron.se/overbridge/
6. TIPS & TRICKS
Here you find a couple of different examples of some of the things you can do with the
Analog Heat +FX.

6.1 STEREO PHASER EFFECT

The Analog Heat +FX can also achieve an effect similar to that of a classic stereo phaser
pedal by using the filter frequency panning function.
1. Select any circuit and set the [FILTER TYPE] to BAND STOP.
22