Table of Contents
Advertisement
Creative embroidering
Lettering can be positioned within the hoop as you like. When the embroidery motif is positioned outside the
embroidering area, the hoop is outlined in red on the display. With the hoop selection it can be checked
whether or not the embroidery motif can be embroidered in another hoop. When the lettering does not fit
in any hoop, two single words can be combined and positioned below each other as the following example
will show.
> Select the file «Alphabets».
> Select the font.
> Enter the text «Made to».
> Touch the icon (1) (standard setting) to use upper case letters.
> Touch the icon (2) to use lower case letters.
> Touch the icon (3) to use numbers and mathematic characters.
> Touch the icon (4) to use special characters.
1
2
3
4
> Toucht the text box above the keyboard to delete the entered text completely.
> Touch the icon «DEL» to delete single letters of the entered text.
> Touch the icon «Confirm» to accept the text.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Select the hoop.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection» again to go back to the Edit
Mode.
Editing words/sentences
> Touch the icon «i»-Dialog.
> Touch the icon «Rotate the motif».
> Touch the icon «+90» to rotate the text by 90°.
> Touch the icon «i» (1).
> Touch the icon «Move the stitch pattern».
> Turn the «Upper Multifunctional knob» to move the embroidery motif horizontally.
148
Advertisement
Table of Contents
