YASKAWA T103 Installation & Primary Operation page 55

No.
(Hex.)
b1-01 Frequency Reference Selection 1
(0180)
b1-02 Run Command Selection 1
(0181)
b1-03 Stopping Method Selection
(0182)
b1-04 Reverse Operation Selection
(0183)
C1-01 Acceleration Time 1
(0200)
RUN
C1-02 Deceleration Time 1
(0201)
RUN
C2-01 S-Curve Time @ Start of Accel
(020B)
C2-02 S-Curve Time @ End of Accel
(020C)
C2-03 S-Curve Time @ Start of Decel
(020D)
C2-04 S-Curve Time @ End of Decel
(020E)
C6-01 Normal / Heavy Duty Selection
(0223)
C6-02 Carrier Frequency Selection
(0224)
d1-01 - d1-16 Reference 1 to 16
(0280 - 0291)
RUN
YASKAWA TOEPC71061782C GA800 Drive Installation & Primary Operation
Name
V/f CL-V/f
Sets the input method for the frequency reference.
0 : Keypad
1 : Analog Input
2 : Memobus/Modbus Communications
3 : Option PCB
4 : Pulse Train Input
V/f CL-V/f
Sets the input method for the Run command.
0 : Keypad
1 : Digital Input
2 : Memobus/Modbus Communications
3 : Option PCB
V/f CL-V/f
Sets the method to stop the motor after removing a Run command or entering a Stop command.
0 : Ramp to Stop
1 : Coast to Stop
2 : DC Injection Braking to Stop
3 : Coast to Stop with Timer
V/f CL-V/f
Sets the reverse operation function. Disable reverse operation in fan or pump applications where reverse rotation is
dangerous.
0 : Reverse Enabled
1 : Reverse Disabled
V/f CL-V/f
Sets the length of time to accelerate from zero to maximum output frequency.
V/f CL-V/f
Sets the length of time to decelerate from maximum output frequency to zero.
V/f CL-V/f
Sets the S-curve acceleration time at start.
V/f CL-V/f
Sets the S-curve acceleration time at completion.
V/f CL-V/f
Sets the S-curve deceleration time at start.
V/f CL-V/f
Sets the S-curve deceleration time at completion.
V/f CL-V/f
Sets the drive duty rating.
0 : Heavy Duty Rating
1 : Normal Duty Rating
V/f CL-V/f
Sets the carrier frequency for the transistors in the drive.
1 : 2.0 kHz
2 : 5.0 kHz (4.0 kHz for AOLV/PM)
3 : 8.0 kHz (6.0 kHz for AOLV/PM)
4 : 10.0 kHz (8.0 kHz for AOLV/PM)
5 : 12.5 kHz (10.0 kHz for AOLV/PM)
6 : 15.0 kHz (12.0 kHz for AOLV/PM)
7 : Swing PWM4 (Audible Sound 1)
8 : Swing PWM4 (Audible Sound 2)
9 : Swing PWM4 (Audible Sound 3)
A : Swing PWM4 (Audible Sound 4)
F : User Defined (C6-03 to C6-05)
V/f CL-V/f
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
11 Drive Control, Duty Modes, and Programming
Description
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
55