Table of Contents
Advertisement
Reset
Press
to open the panel and press the RESET hole to restore the unit to the original factory settings.
Mute
Press POWER/MUTE in 1 second to MUTE ON, press it again 1 second to MUTE OFF.
Press more than 2 seconds POWER/MUTE to power off.
Display blinks MUTE.
Digital tuner
Radio reception
1. Press
to power on, then press SRC once or more to select radio source.
Press BAND once or more to select FM1, FM2, FM3, FM (OIRT), MW1, MW2.
Display shows wave band, frequency, and preset station number if already stored.
2. Tuning to stations: you can tune to your stations manually or by automatic search
tuning.
Press down on
or
the frequency in the display starts running, the radio automatically tunes to a station of
sufficient reception.
3. Repeat step 2 if necessary until you find the desired station.
To tune to a weak station, press on
briefly and repeatedly until you have found optimal reception.
(
or
on the remote control) and release button when
or
(
18
or
on the remote control)
Advertisement
Table of Contents
