Table of Contents
Advertisement
Caution
The ABS pump screw needs to be unscrewed
Brake fluid will be under pressure during this process. Secure the bleed hose and open bleeder screws slowly
Some vehicles do not support automatic bleeding, but manually bleeding
5.2 OIL RESET
The scan tool can be used to reset the engine oil life system, which calculates the optimum oil life change interval based
on the vehicle's driving conditions and climate. The oil life reminder must be reset each time the oil is changed so that the
system can calculate when the next oil change is required.
This function can be performed in the following cases:
If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or
driving time so that the service lamp turns off and the system enables the new service cycle.
After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.
The operation guidelines of the Oil Reset function are shown as below:
1.
Enter the Oil Reset menu and choose relevant models according to the vehicle being tested.
2.
Follow the instructions displayed that are specific to the vehicle and press OK after completing the instructions
shown.
37
Advertisement
Table of Contents
