RAM 1500 2022 Owner's Manual page 283

WARNING!
ALWAYS drive safely with your hands on the
wheel. You have full responsibility and assume
all risks related to the use of the Uconnect
features and applications in this vehicle. Only
use Uconnect when it is safe to do so. Failure to
do so may result in an accident involving serious
injury or death.
Even though the system is designed for many
languages and accents, the system may not always
work for some.
NOTE:
It is recommended that you do not store names in
your Favorites phonebook while the vehicle is in
motion.
Number and name recognition rate is optimized
when the entries are not similar. You can say "O"
(letter "O") for "0" (zero).
Even though international dialing for most number
combinations is supported, some shortcut dialing
number combinations may not be supported.
Audio Performance
Audio quality is maximized under:
Low-To-Medium Blower Setting

Low-To-Medium Vehicle Speed

Low Road Noise

Smooth Road Surface

Fully Closed Windows

Dry Weather Conditions

Operation From The Driver's Seat

Performance such as audio clarity, echo, and
loudness to a large degree rely on the phone and
network, and not the Uconnect Phone.
Echo at the far end can sometimes be reduced by
lowering the in-vehicle audio volume.
Phone Voice Commands
Making and answering hands-free phone calls is
easy with Uconnect. When the Phonebook button
is illuminated on your touchscreen, your system is
UconnectPhone.com
ready. Check
phone compatibility and pairing instructions.
Push the Phone button and wait for the beep to
say a command. See some examples below:
"Call John Smith"

"Dial 123 456 7890"

"Redial" (call previous outgoing phone number)

"Call back" (call previously answered incoming

phone number)
Did You Know: When providing a Voice Command,
push the Phone button
pronounce the name exactly as it appears in your
phonebook. When a contact has multiple phone
numbers, you can say "Call John Smith work".
Voice Text Reply — If Equipped
Uconnect can announce incoming text messages.
Push the VR button
say:
1. "Listen" to have the system read an incoming
text message. (Must have compatible mobile
phone paired to Uconnect system.)
2. "Reply" after an incoming text message has
been read.
for mobile
Listen to the Uconnect prompts. After the
beep, repeat one of the predefined messag-
es and follow the system prompts.
MULTIMEDIA 281
and say "Call", then
or Phone button and
5