RAM 1500 2022 Owner's Manual page 277

Uconnect 3 With 5-inch Display
NOTE:
You must have Bluetooth® enabled on your

phone to complete this procedure.
The vehicle must be in PARK or at a standstill.

Follow the steps below to pair your phone:
1. Place the ignition in the ACC or ON/RUN
position.
2. Press the Phone button.
NOTE:
If there are no phones currently connected

with the system, a pop-up will appear asking
if you would like to pair a mobile phone.
This pop-up only appears when the user

enters Phone Mode and no other device(s)
have previously been paired. If the system
has a phone previously paired, even if no
phone is currently connected with the
system, this pop-up will not appear.
3. Select "Yes" to begin the pairing process.
4. Search for available devices on your
Bluetooth®-enabled mobile phone.
Press the Settings button on your mobile

phone.
Select "Bluetooth®" and ensure it is

enabled. Once enabled, the mobile phone
will begin to search for Bluetooth® connec-
tions.
NOTE:
During the pairing procedure, you may receive a
pop-up on your touchscreen asking you to make
sure the PIN on the touchscreen matches the PIN
from the pop-up on your mobile phone.
5. If "No" is selected, and you still would like to
pair a mobile phone, press the Phone Pairing
or Settings button from the Uconnect Phone
main screen.
Press the Paired Phones button or the Add

Device button.
MULTIMEDIA
Search for available devices on your Blue-

tooth®-enabled mobile phone (see below).
When prompted on the phone, select
"Uconnect" and accept the connection
request.
6. Uconnect Phone will display an in-progress
screen while the system is connecting.
7. When your mobile phone finds the Uconnect
system, select "Uconnect."
8. When prompted on the mobile phone, accept
the connection request from Uconnect.
9. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
phone. Selecting "Yes" will make this phone
the highest priority. This phone will take
precedence over other paired phones within
range and will connect to the Uconnect system
automatically when entering the vehicle. Only
one mobile phone and/or one Bluetooth®
audio device can be connected to the
Uconnect system at a time. If "No" is selected,
simply select "Uconnect" from the mobile
phone/audio device Bluetooth® screen, and
the Uconnect system will reconnect to the
Bluetooth® device.
275
5