Table of Contents
Advertisement
254
MULTIMEDIA
Setting Name
Wheel Alignment Mode
Four Corner Air Suspension Modes
AUX Switches
When the AUX Switches button is pressed on the touchscreen, the system displays the options related to the four vehicle AUX switches.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Setting Name
AUX 1-4
Description
This setting must be activated before performing a wheel alignment, which
will move the vehicle to normal ride height and then disable the air
suspension system. Refer to an authorized dealer for further information.
There are three air suspension modes designed to protect the system in
unique situations. Tire Jack Mode is selected to assist in changing a spare
tire. Transport Mode is selected to assist when the vehicle is being flat bed
towed. Wheel Alignment Mode is selected before performing a wheel
alignment. Refer to an authorized dealer for further information.
Description
This setting will adjust the type and power source for the four vehicle AUX
switches. There are two types: "Latching" and "Momentary". The power
source for the AUX switches can either be set to run off the "Battery" or from
the "Ignition". In addition to setting the type and power source, you can set if
the vehicle will recall the previous state at which the AUX switches were set.
The Recalled Last State setting can be set to "On" or "Off". Last state
conditions are met only if the type is set to Latching and the power source is
set to Ignition.
Advertisement
Table of Contents
